IIT Kanpur · Engineering

Advanced manufacturing process for micro system fabrication

Dr. Shantanu Bhattacharya · 38 free video lectures

38 video lectures. Topics: Lab session-01 Advanced manufacturing process for micro sytem fabrication; Lab session-2 EDM micro machening; Lab session-3 EDM microDrilling; Lab session-4 Laser machening process; Lab session-5 Vaccume Assisted Forming; Lab session-6 Vaccume Forming; Lab session-7…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lecture-01
  2. Lecture-02
  3. Lecture-03
  4. Lecture-04
  5. Lecture-05
  6. Lecture-06
  7. Lecture-07
  8. Lecture-08
  9. Lecture-09
  10. Lecture-10
  11. Lecture-11
  12. Lecture-12
  13. Lecture-13
  14. Lecture-14
  15. Lecture-15
  16. Lecture-16
  17. Lecture-17
  18. Lecture-18
  19. Lecture-19
  20. Lecture-20
  21. Lecture-21
  22. Lecture-22
  23. Lecture-23
  24. Lecture-24
  25. Lecture-25
  26. Lecture-26
  27. Lecture-27
  28. Lecture-28
  29. Lab session-01 Advanced manufacturing process for micro sytem fabrication
  30. Lab session-2 EDM micro machening
  31. Lab session-3 EDM microDrilling
  32. Lab session-4 Laser machening process
  33. Lab session-5 Vaccume Assisted Forming
  34. Lab session-6 Vaccume Forming
  35. Lab session-7 Photolithiography
  36. Lab session-8 replication part 1
  37. Lab session-9 replication part 2
  38. Lab session-10 PCB Making

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Kanpur.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights