IIT Madras · Engineering

Advanced Marine Structures

Dr. Srinivasan Chandrasekaran · 53 free video lectures

53 video lectures. Topics: Introduction and Scope; Fixed type structures; Compliant type structures; New generation marine structures; Environmental loads-I; Environmental loads-II; Environmental loads-III; Environmental loads-IV; Other loads-I; Other loads-II; Ultimate load design principles-I…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Introduction and Scope
  2. Fixed type structures
  3. Compliant type structures
  4. New generation marine structures
  5. Environmental loads-I
  6. Environmental loads-II
  7. Environmental loads-III
  8. Environmental loads-IV
  9. Other loads-I
  10. Other loads-II
  11. Ultimate load design principles-I
  12. Ultimate Limit State-I
  13. Ultimate Limit State-II
  14. Ultimate Limit State-III
  15. Partial safety factor
  16. Plastic design-I
  17. Plastic design-II
  18. Plastic design-III
  19. Plastic design-IV- Example problems-I
  20. Plastic analysis- Example problems-II
  21. Plastic analysis- Example problems-III
  22. Theories of failure-I
  23. Theories of failure-II
  24. Theories of failure-III
  25. Theories of failure-IV
  26. Shear centre-I
  27. Shear centre-II- Examples
  28. Plastic capacity of sections under combined loads-I
  29. Plastic capacity of sections under combined loads-II
  30. Impact analysis- fundamentals-I
  31. Impact analysis- fundamentals-II
  32. Ultimate capacity of tubular joints
  33. Fluid structure interaction-I
  34. Fluid structure interaction-II
  35. Fluid induced vibration-I
  36. Fluid induced vibration-II
  37. Flow through perforated members-I
  38. Flow through perforated members- numerical studies-II
  39. Flow through perforated members- III- Analytical studies
  40. Introduction to Reliability I
  41. Introduction to Reliability II
  42. Introduction to Reliability III
  43. Reliability framework in Marine structures
  44. Ultimate Limit state and Reliability approach I
  45. Ultimate limit state and Reliability approach II
  46. Levels of Reliability
  47. FOSM and AFOSM methods of Reliability
  48. Fracture and Fatigue
  49. Fatigue failure
  50. Fatigue loading and fatigue analysis
  51. Deterministic fatigue analysis
  52. Spectral fatigue analysis
  53. Stress concentration and fatigue analysis

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Madras.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights