IIT Madras · Engineering

Aluminium based Alloys and Metal Matrix Composites

Prof. Ranjit Bauri · 60 free video lectures

Aluminium and its alloys are one of the most important classes of engineering materials which are used in many applications starting from household to aircrafts. Given the wide range of applications of Al alloys the property requirements are also quite diverse. Therefore, understanding the…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Pure Aluminium
  2. Extraction of Aluminium
  3. Alloy Designations
  4. Cast Aluminium Alloys
  5. Hypo and Hyper eutectic alloys
  6. Modifying Al-Si alloys & Decoding Alloy Designation
  7. Solid Solution Hardening-1
  8. Solid Solution Hardening-2
  9. Yield point phenomena & Strain aging
  10. Cottrel-Bilby theory of strain aging
  11. Portevin–Le Chatelier (PLC) effect
  12. Dynamic Strain Aging (DSA)
  13. Features of Serrrated Flow - 1
  14. Features of Serrrated Flow - 2
  15. Precipitation hardening - 1
  16. Precipitation hardening - 2
  17. Precipitation hardening - 3
  18. Precipitation hardening - 4
  19. Precipitation hardening - 5
  20. Precipitation hardening - 6
  21. 7XXX & 8XXX Series Alloys
  22. Strain Hardening - 1
  23. Strain Hardening - 2
  24. Recovery & Recrystallization
  25. Recrystallization Mechanism
  26. Recrystallization: Nucleation & Growth
  27. Dynamic Recrystallization
  28. Discontinuous and Continuous Dynamic Recrystallization
  29. Continuous Dynamic Recrystallization
  30. Geometric Dynamic Recrystallization (GDRX)
  31. Grain boundary strenthening
  32. Grain refinement methods
  33. Homogeneous vs. Heterogeneous Nucleation
  34. Grain refinement by Melt inoculation
  35. Mechanisms of grain refinement by melt inoculation - 1
  36. Mechanisms of grain refinement by melt inoculation - 2
  37. Melt inoculation: Fading & Poisoning
  38. Grain refinement by melt vibration
  39. Severe Plastic Deformation (SPD)
  40. Dynamic recrystallization in SPD
  41. Metal Matrix Composites
  42. Processing of Metal Matrix Composites
  43. Two-phase process, Insitu composites
  44. Particle wetting and Bonding
  45. Particle Distribution in MMCs - 1
  46. Particle Distribution in MMCs - 2
  47. Rule of Mixture -1
  48. Rule of Mixture -2
  49. Strengthening Mechanism in MMCs - 1
  50. Strengthening Mechanism in MMCs - 2
  51. Fracture Behavior of Fiber Reinforced Composites
  52. Ductile Fracture of Metals
  53. Fracture Behavior of Discontinuously Reinforced Composites
  54. Fatigue
  55. Fatigue Crack propagation & Growth
  56. Fatigue Behavior of MMCs – 1
  57. Fatigue Behavior of MMCs – 2
  58. Fatigue Behavior of MMCs – 3
  59. Fatigue Behavior of MMCs – 4
  60. Fatigue Behavior of MMCs – 5

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Madras.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights