IIIT Bangalore · Engineering

Design and Analysis of VLSI Subsystems

Prof. Madhav Rao · 2025 · 95 free video lectures

95 video lectures. Topics: 1.1 - Understanding Silicon; 1.2 - Introduction to NMOS; 1.3 - NMOS Transistor Working; 1.4 - PMOS Transistor; 1.5 - MOS Capacitances; 1.6 - Non Ideal MOS model; 1.7 - Short channel current model; 1.8 - Short channel current model analysis; 2.1 - Channel Length modulation…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. 1.1 - Understanding Silicon
  2. 1.2 - Introduction to NMOS
  3. 1.3 - NMOS Transistor Working
  4. 1.4 - PMOS Transistor
  5. 1.5 - MOS Capacitances
  6. 1.6 - Non Ideal MOS model
  7. 1.7 - Short channel current model
  8. 1.8 - Short channel current model analysis
  9. 2.1 - Channel Length modulation index
  10. 2.2 - DC characteristics of Inverter
  11. 2.3 - Transfer characteristics of Inverter
  12. 2.4 - Skewed Inverter
  13. 2.5 - Skewed Inverter and threshold voltage
  14. 2.6 - Equivalent of transistors in series
  15. 2.7 - Transmission Gate
  16. 3.1 - Bad CMOS Buffer - Part1
  17. 3.2 - Bad CMOS Buffer - Part2
  18. 3.3 - Noise margin characteristics of inverter
  19. 3.4 - Noise margin parameters
  20. 3.5 - Introduction to Delay in CMOS
  21. 3.6 - Transient analysis of CMOS Inverter
  22. 3.7 - RC approximated delay
  23. 3.8 - Switching Resistance
  24. 4.1 - CMOS Inverter approximated to RC Circuit
  25. 4.2 - Elmore delay
  26. 4.3 - Delay of FO4 inverter
  27. 4.4 - Extracting capacitances of 3-Nand gate for delay estimation
  28. 4.5 - Characterizing Delay of NOR gate
  29. 4.6 - Linear Delay model
  30. 4.7 - Logical effort and Parasitic delay
  31. 5.1 - Logical effort and Parasitic delay for different gates
  32. 5.2 - Logical effort for short-channel current model
  33. 5.3 - Ring Oscillator design
  34. 5.4 - Optimizing Gate Size
  35. 5.5 - Optimizing Gate Sizes Example
  36. 5.6 - Optimizing the Stages for an inverter path
  37. 5.7 - Optimizing the Stages for a General Circuit
  38. 5.8 - Decoder Design
  39. 6.1 - Introduction to Combinational Circuit and assymetric gates
  40. 6.2 - Assymetric Gates analysis
  41. 6.3 - Assymetric Gates analysis using short-channel current model
  42. 6.4 - Introduction to Skewed gates
  43. 6.5 - Skewed gates and best P/N ratio
  44. 6.6 - vIntroduction to Pseudo NMOS
  45. 6.7 - Psudeo NMOS gates
  46. 6.8 - Other Logic Family
  47. 6.9 - Dynamic Logic and Domino logic
  48. 7.1 - Domino gates
  49. 7.2 - Introduction to Stick Diagram
  50. 7.3 - Stick Diagram for different gates
  51. 7.4 - Applying Eulers path for stick diagram representations
  52. 7.5 - Multiplexer design and layout
  53. 7.6 - Introduction to Interconnects
  54. 7.7 - Interconnects - RC delay, and Energy
  55. 8.1 - Introduction to crosstalks in interconnects
  56. 8.2 - Transient analysis in Crosstalk
  57. 8.3 - Introduction to Repeaters in Interconnect Engineering
  58. 8.4 - Repeater Design
  59. 8.5 - Energy and delay analysis for interconnectwith repeaters
  60. 8.6 - Repeater Design and Energy-Delay-Product
  61. 8.7 - Introduction to Power
  62. 9.1 - Switching Power and Energy Estimation
  63. 9.2 - Activity factor and estimating dynamic power for a combinational circuit design
  64. 9.3 - Analyzing Dynamic Power
  65. 9.4 - Energy estimation through driving factor
  66. 9.5 - Energy expression in terms of delay
  67. 9.6 - Voltage Scaling
  68. 9.7 - DVFS
  69. 10.1 - Introduction to subthreshold leakage current model
  70. 10.2 - Subthreshold leakage current and Gate leakage current
  71. 10.3 - Estimating Static Power
  72. 10.4 - Introduction to CMOS Latch design
  73. 10.5 - CMOS Latch Design
  74. 10.6 - CMOS Latch and flipflop design
  75. 11.1 - Static Timing Analysis
  76. 11.2 - Static Timing Analysis - Continued
  77. 11.3 - Static Timing Analysis - Part2
  78. 11.4 - Static Timing Analysis - Part2.1
  79. 11.5 - Static Timing Analysis - Part3
  80. 11.6 - TPDQ and TPCQ
  81. 11.7 - Static Timing Analysis - Part4
  82. 11.8 - Static Timing Analysis - Part5
  83. 11.9 - Static Timing Analysis - Part6
  84. 11.10 - SET and CLEAR enabled Latch and Flipflop Design
  85. 12.1 - 1-bit Adder design
  86. 12.2 - Adder-Part2
  87. 12.3 - PG architecture - Part1
  88. 12.4 - PG architecture - Part2
  89. 12.5 - Carry Skip Adder
  90. 12.6 - Carry Look Ahead and Carry Increment Adder
  91. 12.7 - Other Adder Subsystems
  92. 12.8 - Approximate Multipliers - Part 1
  93. 12.9 - Approximate Multipliers - Part 2
  94. 12.10 - Approximate Adder
  95. Live Session 26-02-2022

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIIT Bangalore.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights