IISc Bangalore · Engineering

Design and Simulation of DC-DC converters using open source tools

Prof. L. Umanand · 25 free video lectures

25 video lectures. Topics: System Overview; Understanding Rectifier with C-filter; Setting up gEDA, ngSpice and Octave; Simulation walk-through : Rectifier C-filter example; Designing the rectifier capacitor filter circuit; Startup surge limiting; DC-DC converter concepts; Buck, Boost and…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. System Overview
  2. Understanding Rectifier with C-filter
  3. Setting up gEDA, ngSpice and Octave
  4. Simulation walk-through : Rectifier C-filter example
  5. Designing the rectifier capacitor filter circuit
  6. Startup surge limiting
  7. DC-DC converter concepts
  8. Buck, Boost and Buck-Boost Converters
  9. Simulation Example of Buck Converter
  10. Understanding Buck Converter
  11. Understanding Boost and Buck-Boost
  12. Forward Converter Topology
  13. Waveforms and Design
  14. Simulation of Forward Converter
  15. Forward Converter with Lossless Core Reset
  16. Transformer Design
  17. Inductor Design
  18. Flyback Converter Topology
  19. Pushpull Converter
  20. Half and Full Bridge Converters
  21. Close Loop Operation of Converters
  22. Simulation examples
  23. Multi-Output Converters
  24. Concluding Remarks
  25. Live Session 02-03-2020

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IISc Bangalore.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights