IIT Guwahati · Engineering

Experimental Methods in Fluid Mechanics

Prof. Pranab K. Mondal · 2025 · 43 free video lectures

This course deals with the experimental techniques in Fluid Mechanics. One part of the course focuses on different techniques and challenges associated with the measurement of flow features. Other part of the course has emphasis on the statistical analysis of experimental data. Thus, this course…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lec 1 : Basic concepts, Calibration
  2. Lec 2 : Dimensions, Units, Standards, Systems of dimensions, System of units, Unit conversion table
  3. Lec 1 : Basic concept of dynamic measurements
  4. Lec 2 : Basic concept of dynamic measurements Contd.
  5. Lec 3 : Basic concept of dynamic measurements Contd.
  6. Lec 4 : System response and distortion, Impedance matching
  7. Lec 1 : Dimensional measurement, Gauge blocks, The pneumatic displacement gauge
  8. Lec 2 : Dimensional measurement, Gauge blocks, The pneumatic displacement gauge-II
  9. Lec 1 : Pressure Measurements: Definition of pressure and Dynamic response considerations
  10. Lec 2 : Mechanical pressure measurement devices, U-tube manometer, The inclined well type manometer
  11. Lec 3 : The aneroid barometer, Diaphragm and Bellows Gauges
  12. Lec 1 : The Mcleod gauge, The Pirani gauge, The Ionization gauge
  13. Lec 2 : The Mcleod gauge, The Pirani gauge, The Ionization gauge Contd.
  14. Lec 3 : The Mcleod gauge, The Pirani gauge, The Ionization gauge Contd.
  15. Lec 4 : Pressure measurement using 3 holes / probes
  16. Lec 5 : Pressure measurement using 3 holes / probes Contd.
  17. Lec 1 : Flow obstruction flow rate measurement (venturimeter/orificemeter), the Rotameter
  18. Lec 2 : Flow obstruction flow rate measurement (venturimeter/orificemeter), the Rotameter Contd.
  19. Lec 3 : Thermal Anemometry(hot wire/hot film), Hot wire anemometer
  20. Lec 4 : Thermal Anemometry(hot wire/hot film), Hot wire anemometer Contd.
  21. Lec 5 : Laser Doppler anemometry
  22. Lec 6 : Measurement of velocity components by 3 holes and 4 holes probes
  23. Lec 1 : Ideal gas thermometer, Temperature measurement by mechanical and electrical effects
  24. Lec 2 : Ideal gas thermometer, Temperature measurement by mechanical and electrical effects Contd.
  25. Lec 3 : Thermostatic temperature, Resistance Temperature Detectors(RTD), Thermistors, Thermocouples
  26. Lec 4 : Temperature measurement by Radiation, The optical pyrometer
  27. Lec 5 : Transient response of thermal system, Thermocouple compensation, temperature measurement in high speed flow
  28. Lec 6 : Transient response of thermal system, Thermocouple compensation, temperature measurement in high speed flow Contd
  29. Lec 7 : Transient response of thermal system, Thermocouple compensation, temperature measurement in high speed flow Contd
  30. Lec 1 : Constant temperature hot-wire anemometer, LDA
  31. Lec 2 : Use of PIV
  32. Lec 3 : Use of PIV Contd.
  33. Lec 4 : Use of PIV Contd.
  34. Lec 1: Measurement of pitch angle
  35. Lec 2: Measurement of torque by dyanmometer, strain gauge, transducers
  36. Lec 1: Measurement of microscale flow features - I
  37. Lec 2: Measurement of microscale flow features - II
  38. Lec 1: Transient and Frequency response consideration
  39. Lec 2: Examples
  40. Lec 1: Analysis of experimental data, causes and types of experimental errors
  41. Lec 2: Rejection of data: Chauvenets Criterion with example
  42. Lec 3: Error propagation: function of two variables, several variables
  43. Lec 4: The Method of Least square with example

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights