IIT Guwahati · Engineering

Finite element modeling of welding processes

Prof. Swarup bag · 43 free video lectures

43 video lectures. Topics: Properties, Modelling approaches, Process modelling and Optimization; Fusion welding -1; Fusion welding -2; Soldering, Brazing, Solid-state welding processes; Advanced welding processes; Advances in laser microwelding; Additive manufacturing processes; Elastic stress…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lec 1 : Properties, Modelling approaches, Process modelling and Optimization
  2. Lec 2 : Fusion welding -1
  3. Lec 3 : Fusion welding -2
  4. Lec 4 : Soldering, Brazing, Solid-state welding processes
  5. Lec 5 : Advanced welding processes
  6. Lec 6 : Advances in laser microwelding
  7. Lec 7 : Additive manufacturing processes
  8. Lec 8 : Elastic stress analysis-I
  9. Lec 9 : Elastic stress analysis-II and Potential energy method
  10. Lec 10 : Three- Dimensional element
  11. Lec 11 : Weighted residual method
  12. Lec 12 : Material nonlineaity-I
  13. Lec 13 : Material nonlineaity-II
  14. Lec 14 : Fluid flow and Natural coordinate system-I
  15. Lec 15 : Natural coordinate system in 3D and XFEM
  16. Lec 16 : Introduction to heat source model
  17. Lec 17 : Heat source models in welding-I
  18. Lec 18 : Heat source models in welding-II
  19. Lec 19 : Heat source model for Keyhole mode and solid state welding
  20. Lec 20 : Implementation of FEM in fusion welding processes
  21. Lec 21 : Implementation of FEM for fluid flow in fusion welding processes
  22. Lec 22 : FEM modeling of EBW and RSW
  23. Lec 23 : FEM modeling of FSW and hybrid FSW
  24. Lec 24 : Demonstration of thermal model development using commercial software
  25. Lec 25 : Fluid flow modeling in welding processes
  26. Lec 26 : Heat transfer and fluid flow analysis in quasi-steady state
  27. Lec 27 : Prediction of free surface profile
  28. Lec 28 : Principle stress, Hydrostatic and Deviatoric Components of Stress
  29. Lec 29 : Yield Function, Von Mises Yield Surface and Hardening rule
  30. Lec 30 : Material models, Residual stress and distortion
  31. Lec 31 : Phase transformation effect on Residual stress and distortion
  32. Lec 32 : Demonstration of thermo-mechanical model development using commercial software
  33. Lec 33 : Fundamentals of metal transfer in arc welding
  34. Lec 34 : FE-based modelling approaches
  35. Lec 35 : Theoretical development of heat transfer model
  36. Lec 36 : Heating of nano-film
  37. Lec 37 : Theoretical development of stress analysis model
  38. Lec 38 : Fundamentals of wire arc additive manufacturing processes-I
  39. Lec 39 : Fundamentals of wire arc additive manufacturing processes-II
  40. Lec 40 : Modelling approaches of additive manufacturing
  41. Live Session 17-02-2021
  42. Live Session 18-03-2021
  43. Live Session 13-04-2021

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights