IIT Kanpur · Engineering

Introduction to airplane performance

Prof. A K Ghosh · 2023 · 48 free video lectures

This course is designed to provide an integrated introductory treatment of airplane performance with flavor of aircraft design and flight testing.

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. General Introduction: Airplane Performance Characteristics
  2. George Cayley: Concept of Lift and Drag
  3. Introduction to airplane and its components
  4. Hansa 3 Aircraft and its Primary Systems
  5. Concept of Lift Aerofoil: Wing : Complete Aircraft
  6. Drag Polar
  7. Revision
  8. Standard Atmosphere: Description and Modeling
  9. Measuring Instruments: Altimeter, Airspeed Indicator
  10. Equations of Motion: Static Performance
  11. Thrust Required, Power Required: Cruise
  12. Excess Thrust and Power: Climb Angle and Rate of Climb
  13. Review
  14. Thrust Required: A Closer Look
  15. Modeling of CL: Dimensional Analysis
  16. A Closer Look: Point Mass Model, Dimensional Analysis
  17. Estimation of Drag Polar Through Flight Test
  18. Estimation of Rate of Climb
  19. Revision.
  20. Range and Endurance
  21. Range and Endurance: Continued...
  22. Gliding Flight
  23. Accelerated Flight
  24. V-n Diagram
  25. V stall: Cruise and Manoeuvre
  26. Flaps:High Lift Devices to Reduce Take off / Landing Distance
  27. Take off: Warm-up Lecture
  28. Take off Performance
  29. Take off Performance:Continued...
  30. Revision...
  31. Landing Performance
  32. Landing Performance: Continued...
  33. Challanges in Takeoff and Landing: Single and Twin Engines
  34. Introduction to Static Stability
  35. Positioning of Center of Pressure for Static Stability
  36. Revision.....
  37. Stability and Control: Designers Perspective
  38. Stability and Control: Designers Perspective Continued...
  39. Longitudinal Control: Elevator
  40. Contribution of Wing and Tail: Stability
  41. Stability: Wing and Tail Contribution
  42. Tutorial
  43. Control: Elevator
  44. Control: Delta-e Required
  45. Control: Delta-e Required continued...
  46. Design Basics: Wing Loading & Thrust Loading
  47. Design Basics: Sweep & Dihedral
  48. Revision .

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Kanpur.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights