IIT Guwahati · Engineering

Introduction to Machining and Machining Fluids

Prof. Mamilla Ravi Sankar · 28 free video lectures

28 video lectures. Topics: Introduction; Introduction & Importance of Machining; Principles of Machining or Metal Cutting; Cutting Tools; Forces in Machining; Tribology in Machining; Lubrication surface roughness in Machining; Machinability and Thermal Aspects; Tool Wear and Tool life Part-1; Tool…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Introduction
  2. Introduction & Importance of Machining
  3. Principles of Machining or Metal Cutting
  4. Cutting Tools
  5. Forces in Machining
  6. Tribology in Machining
  7. Lubrication surface roughness in Machining
  8. Machinability and Thermal Aspects
  9. Tool Wear and Tool life Part-1
  10. Tool Wear and Tool life Part-2
  11. Tool Wear and Tool life Part-3
  12. Tool Materials and Coatings
  13. Machining Fluids /Cutting Fluids and its Additives Part 1
  14. Machining Fluids /Cutting Fluids and its Additives Part 2
  15. Machining Fluids / Cutting Fluids and its Emissions
  16. Eco Friendly Cutting Fluids Part 1
  17. Eco Friendly Cutting Fluids Part 2
  18. Rheology and Thermal Characterization of Machining / Cutting Fluids
  19. Bio-degradation Studies of Machining /Cutting Fluids
  20. Cutting Fluid Application in Machining Region
  21. Practical Machining Processes - 1
  22. Practical Machining Processes - 2
  23. Introduction to Abrasive Processes - Grinding
  24. Cutting fluids in Grinding Process
  25. Unbonded Conventional Abrasive Processes
  26. Advances in Metal Cutting_Machining Processes
  27. Advances in Metal Cutting_Machining Processes-2
  28. Live Session 16-03-2021

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights