IIT Guwahati · Engineering

Mathematical Modeling Of Manufacturing Processes

Prof. Swarup Bag · 2019 · 38 free video lectures

The understanding of the basic mechanism such as heat and mass transport with associated fluid flow including metallurgical transformation, distortion and residual stress generation in different manufacturing processes is the focus of this course. Understanding the complex interaction not only…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lec 1: Materials and manufacturing Processes-1
  2. Lec 2: Materials and manufacturing Processes-2
  3. Lec 3: Physics based modeling approach at different scale
  4. Lec 4: Evaluation of peroperties and process modelling
  5. Lec 1: Thermofluid and electromagnetic analysis
  6. Lec 2: Solid-state deformation and residual stress-1
  7. Lec 3: Solid-state deformation and residual stress-2
  8. Lec 4: Melting, solidification and additive manufacturing
  9. Lec 1: Force and velocity diagram-1
  10. Lec 2: Force and velocity diagram-2
  11. Lec 3: Heat transfer analysis
  12. Lec 1: Principal and mechanism of different processes-1
  13. Lec 2: Principal and mechanism of different processes-2
  14. Lec 1: Mechanics of bulk metal forming
  15. Lec 2: Mechanics of sheet metal forming-1
  16. Lec 3: Mechanics of sheet metal forming-2
  17. Lec 4: Heat transfer and thermo-mechanical processing
  18. Lec 1: Fusion welding processes -1
  19. Lec 2: Fusion welding processes -2
  20. Lec 3: Physics of welding and metal transfer
  21. Lec 4: Heat source model in fusion welding
  22. Lec 5: Heat transfer and material flow
  23. Lec 1: Solidification in welding 1
  24. Lec 2: Solidification in welding 2
  25. Lec 3: Solid state welding 1
  26. Lec 4: Solid state welding 2
  27. Lec 5: Hybrid welding,residual stress and distortion
  28. Lec 1: Cooling and solidification at different casting processes
  29. Lec 2: Powder metallurgy
  30. Lec 1: Principle of surface and coating technologies
  31. Lec 2: Principle and development of additive manufacturing technologies-1
  32. Lec 3: Principle and development of additive manufacturing technologies-2
  33. Lec 1: Fundamentals of heat treatment
  34. Lec 2: Evaluation of micro-structural properties and residual stress
  35. Lec 1: Down-scaling of conventional manufacturing processes and Micro-to-nano manufacturing
  36. Lec 2: Packaging, micro-finishing and micro-manufacturing processes
  37. Lec 1: Processing and shaping of non-metals and bio-materials
  38. Lec 2: Principle of glass and ceramics processing and their shaping

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights