IIT Kharagpur · Engineering
Mechanism and Robot Kinematics
Prof. Anirvan Dasgupta · 2019 · 40 free video lectures
This course will be a foundation course in analysis of mechanisms and robots. After a brief introduction to the subject matter and terms, the audience will be introduced to kinematic analysis of planar constrained mechanisms, and closed and open chain robot manipulators. The course will dwell upon…
▶ Play on Open Lecture HallCourse page ↗
Lectures
- Lecture 1 : Introduction
- Lecture 2 : Nomenclature
- Lecture 3 : Kinematic Diagram
- Lecture 4 : Degree of Freedom – I
- Lecture 5 : Degree of Freedom – II
- Lecture 6 : Degree of Freedom – Failure
- Lecture 7 : Grashof Criteria – I
- Lecture 8 : Grashof Criteria – II
- Lecture 9 : Geometry and Representation of Vectors
- Lecture 10 : Displacement Analysis: Constrained Mechanism – I
- Lecture 11 : Displacement Analysis: constrained mechanism – II
- Lecture 12 : Displacement Analysis: constrained mechanism – III
- Lecture 13 : Displacement Analysis: constrained mechanism – IV
- Lecture 14 : Displacement Analysis: open chain robot – I
- Lecture 15 : Displacement Analysis: open chain robot – II
- Lecture 16 : Displacement Analysis: open chain robot – III
- Lecture 17 : Displacement Analysis: open chain robot – IV
- Lecture 18 : Displacement Analysis: closed chain robot – I
- Lecture 19 : Displacement Analysis: closed chain robot – II
- Lecture 20: Velocity Analysis: geometric concepts – I
- Lecture 21 : Velocity Analysis: geometric concepts – II
- Lecture 22 : Velocity Analysis: geometric concepts – III
- Lecture 23 : Velocity Analysis: application of geometric concepts – I
- Lecture 24 : Velocity Analysis: application of geometric concepts – II
- Lecture 25 : Velocity Analysis: application of geometric concepts – III
- Lecture 26 : Velocity Analysis: analytical approach – I
- Lecture 27 : Velocity Analysis: analytical approach – II
- Lecture 28 : Velocity Analysis: analytical approach – III
- Lecture 29 : Serial Manipulator Velocity Analysis – I
- Lecture 30 : Serial Manipulator Velocity Analysis – II
- Lecture 31: Serial Manipulator Velocity Analysis – III
- Lecture 32: Parallel Manipulator Velocity Analysis
- Lecture 33: Path Generation Problem
- Lecture 34: Acceleration Analysis – I
- Lecture 35: Acceleration Analysis – II
- Lecture 36: Force Analysis – I
- Lecture 37: Force Analysis – II
- Lecture 38: Coordinate transformation – I
- Lecture 39: Coordinate transformation – II
- Lecture 40: Coordinate transformation – III
From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Kharagpur.
Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights