IIT Guwahati · Engineering

Power Electronics Applications in Power Systems

Prof. Sanjib Ganguly · 35 free video lectures

Electrical power system is growing very fast in a country like India. Thus, the operation of electrical power system becomes more and more complex. To enhance the reliability and to have faster control, there needs power electronics-based devices. There are various NPTEL courses to understand the…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lec 1: Basic Concepts of active and reactive power
  2. Lec 2: Basic Concepts of reactive power compensation
  3. Lec 3: Basic mathematical modelling of power transmission systems
  4. Lec 4: Derivation of the relation of sending and receiving end voltages and currents: Part A
  5. Lec 5: Derivation of the relation of sending and receiving end voltages and currents: Part B
  6. Lec 6: Derivations of power flow expressions
  7. Lec 7: Numerical example showing determination of power flow
  8. Lec 8: Generalized expression for active and reactive power at any point of a long line
  9. Lec 9: Mid-point voltage and current for long, lossless transmission lines
  10. Lec 10: Plot of mid-point voltage vs line loading
  11. Lec 11: Numerical example of mid-point compensation: Part A
  12. Lec 12: Numerical example of mid-point compensation: Part B
  13. Lec 13: Effect of Mid-point compensation on power flow of transmission lines
  14. Lec 14: Thyristor controlled reactor (TCR)
  15. Lec 15: Harmonics in TCR and Three-phase TCR configuration
  16. Lec 16: Operating Characteristics of TCR
  17. Lec 17: Categorization of different types of SVC and Fixed capacitor TCR (FC-TCR)
  18. Lec 18: Mechanically Switched Capacitor TCR (MSC-TCR) and Thyrisor Switch Capacitor (TSC)
  19. Lec 19: Thyristor Switch Capacitor (TSC)
  20. Lec 20: Design of TSC-TCR: Numerical Example
  21. Lec 22: SVC in enhancement of transient stability of power systems
  22. Lec 23: SVC in enhancement of synchronizing power coefficient
  23. Lec 24: SVC in power system oscillation damping
  24. Lec 25: SVC in voltage control of power systems: Modelling
  25. Lec 26: SVC in voltage control of power systems: Control characteristics
  26. Lec 27: SVC in voltage control of power systems: Numerical example
  27. Lec 28: Basic operating principle of TCSC
  28. Lec 29: Basic mathematical modelling of TCSC-Part 1
  29. Lec 30: Basic mathematical modelling of TCSC-Part 2
  30. Lec 31: TCSC reactance and hamomics analysis
  31. Lec 32: Applications of TCSC in power systems
  32. Lec 33: Basic mathematical modelling of STATCOM
  33. Lec 34: Applications of STATCOM in power systems
  34. Lecture 35: Basic mathematical modelling of SSSC
  35. Lec 36: Applications of SSSC in power systems

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights