IIT Kanpur · Engineering

Production Technology: Theory and Practice

Prof. Sounak Kumar Choudhury · 15 free video lectures

This is a fundamental course on Production Technology clarifying some of the basic manufacturing processes including 10 hours of the hands-on laboratory sessions. This course has five modules, namely Materials and their properties, Conventional Machining Processes, Non-Traditional Machining…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lecture 01: Engineering Materials & Their Properties-1
  2. Lecture 02: Engineering Materials & Their Properties-2
  3. Lecture 03: Engineering Materials & Their Properties-3
  4. Lecture 04: Metal Machining-1: Introduction to Machining
  5. Lecture 05: Metal Machining-2: Mechanism of plastic deformation
  6. Lecture 06: Metal Machining-3: Types of Chips, Tool nomenclature and tool angles
  7. Lecture 07: Metal Machining-4: Selection of Tool angles, Forces in machining
  8. Lecture 08: Metal Machining-5: Merchant’s Circle Diagram
  9. Lecture 09: Metal Machining-6: Friction in Metal Cutting
  10. Lecture 10: Metal Machining-7: Practical Machining Operations; Force Measurement
  11. Lecture 11: Metal Machining-8: Force Measurement
  12. Lecture 12: Metal Machining-9: Tool Wear and Tool Life
  13. Lecture 13: Metal Machining-10: Factors affecting Tool Life
  14. Lecture 14: Metal Machining-11: Abrasive Machining Processes
  15. Lecture 15: Metal Machining-12: Abrasive Machining Processes

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Kanpur.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights