IIT Roorkee · Engineering

Railway Engineering

Prof. Rajat Rastogi · 64 free video lectures

64 video lectures. Topics: Introduction; Permanent Way; Gauges; Wheels and Axles, Locomotives, Wagons; Wagons, Coning of Wheels; Rail Sections; Rail Length, Tests & Failures; Sleepers – Density & Spacing; Sleepers – Types & Uses; Ballast Cushion; Traction and Resistances; Resistances; Hauling…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lecture 01 Introduction
  2. Lecture 02 Permanent Way
  3. Lecture 03 Gauges
  4. Lecture 04 Wheels and Axles, Locomotives, Wagons
  5. Lecture 05 Wagons, Coning of Wheels
  6. Lecture 06: Rail Sections
  7. Lecture 07: Rail Length, Tests & Failures
  8. Lecture 08: Sleepers – Density & Spacing
  9. Lecture 09: Sleepers – Types & Uses
  10. Lecture 10: Ballast Cushion
  11. Lecture 11: Traction and Resistances
  12. Lecture 12: Resistances
  13. Lecture 13: Hauling Capacity & Tractive Effort
  14. Lecture 14: Hauling Capacity Numerical
  15. Lecture 15: Track Modulus & Relief of Stresses
  16. Lecture 16: Track Stresses – Vertical Lateral Longitudinal
  17. Lecture 17: Track Stresses - Rails
  18. Lecture 18: Track Stresses – Rails & Sleepers
  19. Lecture 19: Track Stresses – Ballast Formation
  20. Lecture 20: Joints in Rails – Types & Requirements
  21. Lecture 21: Joints in Rails – Insulated & Welded
  22. Lecture 22: Joints in Rails – Flash Butt Weld
  23. Lecture 23: SWR Rails
  24. Lecture 24: Creep in Rails
  25. Lecture 25: Buckling, Hogging, Battering, Corrosion & Corrugation
  26. Lecture 26: Corrosion, Corrugation and Rail Failures - I
  27. Lecture 27: Rail Failures II
  28. Lecture 28: Rail Failures and Wears
  29. Lecture 29: Rail Wears
  30. Lecture 30: Permissible Wear, LWR & CWR
  31. Lecture 31: LWR and CWR
  32. Lecture 32: Fastenings – Rail to Rail
  33. Lecture 33: Fastenings – Rail to Sleeper (Elastic)
  34. Lecture 34: Fastenings – Rail to Sleeper (Others)
  35. Lecture 35: Track Alignment
  36. Lecture 36: Speed on Track
  37. Lecture 37: Circular Curve on Track
  38. Lecture 38: Superelevation on Track - I
  39. Lecture 39: Superelevation on Track – II & Transition Curves - I
  40. Lecture 40: Transition Curves – II, Extra Clearances
  41. Lecture 41: Widening of Gauge & Vertical Curves
  42. Lecture 42: Realignment of Curves
  43. Lecture 43: Turnouts, Points & Crossings - I
  44. Lecture 44: Turnouts, Points & Crossings - II
  45. Lecture 45: Crossings and Turnout Design
  46. Lecture 46: Turnout Design & Maintenance
  47. Lecture 47: Track Junctions & Design - I
  48. Lecture 48: Track Junctions & Design II
  49. Lecture 49: Signaling - I
  50. Lecture 50: Signaling - II
  51. Lecture 51: Signaling - III
  52. Lecture 52: Interlocking Systems - I
  53. Lecture 53: Interlocking Systems - II
  54. Lecture 54: Interlocking Systems - III
  55. Lecture 55: Interlocking Systems - IV
  56. Lecture 56: Train Control Systems - I
  57. Lecture 57: Train Control Systems - II
  58. Lecture 58: Stations, Yards, Level Crossings
  59. Lecture 59: Track Maintenance I
  60. Lecture 60: Track Maintenance II
  61. Lecture 61: Track Maintenance III
  62. Lecture 62: Track Maintenance IV
  63. Lecture 63: Track Renewals and Drainage
  64. Lecture 64: High Speed Tracks

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Roorkee.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights