IIT Hyderabad · Engineering

Stability Aspects of Structural Steel Design: Concepts and Applications

Prof. Mahendrakumar Madhavan · 43 free video lectures

43 video lectures. Topics: Introduction to Stability _Session 1; Introduction to Stability _Session 2; Introduction to Stability _Session 3; Introduction to Stability _Session 4; Classical Column Theory - Session 1; Classical Column Theory - Continued; Martix Method of Solving stability problems…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Introduction to Stability _Session 1
  2. Introduction to Stability _Session 2
  3. Introduction to Stability _Session 3
  4. Introduction to Stability _Session 4
  5. Classical Column Theory - Session 1
  6. Classical Column Theory - Continued
  7. Martix Method of Solving stability problems
  8. Martix Method of Solving stability problems - Continued
  9. Inelastic bucking theories of column
  10. Shanley's Theory
  11. Imperfect Columns
  12. Residual Stresses and its effects on column design curves
  13. Perry Robertson approach
  14. European multiple column curves
  15. American column curves
  16. Introduction to beams
  17. Solution for Uniform torsion or St.Venant's torsion
  18. Torsional constant for open sections
  19. Torsional constant for closed sections
  20. Solution for Non-Uniform torsion or Vlasov's torsionv
  21. Elastic critical moment for simply supprted beam subjected to unifrm bending using differential mthd
  22. Solution for elastic critical moment of simply supported beam subjected to uniform bending using....
  23. Solution for elastic critical moment of simply supported beam subjected to non-uniform bending
  24. Solution for elastic critical moment of simply supported beam subjected to concentrated load at....
  25. Elastic critical moment for fixed ended beam subjected to uniform bending
  26. Critical loads for a cross-section under axial compression
  27. Problem solving on Torsion
  28. Problem solving on Beams
  29. Deriving Von Karman's partial differential equation for thin plates
  30. Strain energy method for obtaining critical stress for plates
  31. Strain energy method for obtaining critical stress for plates under different loading conditions
  32. Generic equations for elastic plate buckling coefficient, k
  33. Development of width-to-thickness ratio limits
  34. Concept of post critical buckling
  35. Deriving the effective width of a plate under uniform compression as per AISI S100
  36. Problem solving: Effective Width Method (EWM)
  37. Tension Field Action in Plate girder - An application of post-critical buckling in thin plates
  38. Deriving the design equations in IS 800:2007 for Simple post-critical method & Tension field method
  39. Design of a plate girder-A design example_Part_1
  40. Design of a plate girder-A design example_Part_2
  41. Curved plate girders: An overview of fabrication and construction
  42. Importance of steel structures
  43. Live Session 05-02-2025

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Hyderabad.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights