IIT Guwahati · Engineering

Steam Power Engineering

Prof. Vinayak N. Kulkarni · 2019 · 33 free video lectures

This course deals with the steam power plants. One part of the course is about simple steam power cycle, reheat, regeneration and superheating. Further actual cycle with component efficiencies would also be discussed. Then each component of the plant is discussed detail. Initially, types of steam…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lec 1: Review of thermodynamics
  2. Lec 2: Rankine cycle
  3. Lec 3: Performance estimation of steam power cycles
  4. Lec 4: Carnot cycle examples
  5. Lec 5: Rankine cycle with superheat
  6. Lec 6: Rankine cycle with reheat theory and example
  7. Lec 7: Examples of Rankine cycle
  8. Lec 1: Example of reheat Rankine cycle
  9. Lec 2: Rankine cycle with regeneration
  10. Lec 3: Feedwater heaters
  11. Lec 4: Cogeneration of power and process heat
  12. Lec 5: Examples of regeneration
  13. Lec 1: Examples of regenerative Rankine cycle
  14. Lec 2: Binary/multi-fluid cycles
  15. Lec 3: Low temperature power cycles
  16. Lec 1: Examples of binary cycles
  17. Lec 2: Types of boilers
  18. Lec 3: Boiler accessories
  19. Lec 4: Practice examples
  20. Lec 1: Stagnation conditions & Nozzle flow
  21. Lec 2: Nozzle flow
  22. Lec 3: Examples of Nozzle
  23. Lec 1: Impulse Turbine 1
  24. Lec 2: Impulse Turbine 2
  25. Lec 3: Examples on Impulse Turbine
  26. Lec 1: Reaction Turbine
  27. Lec 2: Reheat Factor
  28. Lec 3: Examples on Turbine 1
  29. Lec 4: Examples on Turbine 2
  30. Lec 1: Gas Mixture
  31. Lec 2: Psychrometry 1
  32. Lec 3: Psychrometry 2
  33. Lec 4: Condensers

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights