IIT Hyderabad · Engineering

Theory of Plasticity for Engineers: Concepts and Applications

Prof. Amirtham Rajagopal · 31 free video lectures

31 video lectures. Topics: Introduction to Plasticity; Stress-Strain Relations; Pressure Independent Materials Failure Criteria; Pressure Dependent Materials Failure Criteria; Components of Plasticity, Kuhn-Tucker conditions; Perfectly Plastic Materials and Flow Rule; Stress-Strain Relations for…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Introduction to Plasticity
  2. Stress-Strain Relations
  3. Pressure Independent Materials Failure Criteria
  4. Pressure Dependent Materials Failure Criteria
  5. Lec-05 Components of Plasticity, Kuhn-Tucker conditions
  6. Lec-06 Perfectly Plastic Materials and Flow Rule
  7. Lec-07 Stress-Strain Relations for Hardening Materials
  8. Lec-08 Implementation in Metals
  9. Lec-09 Elasto-Plastic Analysis for Composite Materials
  10. Lec-10 Linear Elastic Brittle Fracture Models
  11. Lec-11 Implementation of Concrete Constitutive Models
  12. Lec 12 Elastic Perfectly Plastic Fracture Models for Concrete
  13. Lec-13 Plasticity Models: Plain Concrete and FRC
  14. Lec-14 Constitutive Models for Confined Concrete
  15. Lec 15 - Material Damage and Continuum Damage Mechanics
  16. Lec 16 - Mechanical Representation of Damage and Damage Variables
  17. Lec-17 Thermodynamics of damaged material
  18. Lec- 18 Inelastic Constitutive Equation for Materials with Isotropic Damage
  19. Lecture 19 Strain Energy Release and Stress Criteria in Damage Development
  20. Lecture 20 Constitutive and Evolution Equations of Elastic-Plastic Damage
  21. Lec-21 Anisotropic Damage Theory and Dissipation Potential Functions
  22. Lec-22_Part-1 Viscoelasticity, Viscoplasticity and Energy-Based Inelastic Damage Theory
  23. Lec-22_Part-2 Viscoelasticity, Viscoplasticity and Energy-Based Inelastic Damage Theory
  24. Lec-23 Strain Gradient Theories
  25. Lec-24 Basics of Blast and Impact
  26. Lec-25 Overview of Constitutive Material Models for Concrete
  27. Lec-26 Concrete Constitutive Models and Their Extension to UHPC
  28. Lec-27 Constitutive modeling of concrete under dynamic loading
  29. Lec-28 Foundations of One-Dimensional Rate-Independent Plasticity
  30. Lec-29 Incremental Elastoplasticity and Convex Return-Mapping Algorithms
  31. Lec-30 Finite Element Formulation of Elastoplasticity

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Hyderabad.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights