IIT Roorkee · Engineering

Thermo-Mechanical And Thermo-Chemical Processes

Prof. S. R. Meka, Prof. Vivek Pancholi · 2019 · 40 free video lectures

Microstructural features like grain size, phase fraction and size distribution can be tailored by understanding and optimizing thermo-mechanical and thermo-chemical processes i.e. coupling the heat treatment either by introduction of mechanical energy into solids or by altering the chemistry of…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Introduction to Thermomechanical Processes
  2. Conventional Thermomechanical Processes
  3. Non-conventional Thermomechanical Processes
  4. Stress and Strain
  5. Effect of Strain Rate and Temperature
  6. Microstructure Evolution
  7. Dynamic Recovery
  8. Discontinuous Dynamic Recrystallization
  9. Dynamic Recrystallization : Critical Stress and Strain
  10. Continuous Dynamic Recrystallization (CDRX) and Geometrical Dynamic Recrystallization (GDRX)
  11. Stereographic Projection
  12. Using Stereographic Projection
  13. Crystallographic Texture
  14. Crystallographic Texture:Texture Components
  15. Crystallographic Texture: Application
  16. Constitutive Analysis
  17. Constitutive Analysis: Low Strain Rate
  18. Higher Strain Rate: Hot Working
  19. Constitutive Based Model : Physical Based Model
  20. Constitutive analysis : Case Study
  21. Processing Maps : Deformation Mechanism maps
  22. Processing Maps : Dynamic Material Model
  23. Microstructure and Application
  24. Processing Maps : Different Models
  25. Processing Maps : Case Study
  26. Equal Channel Angular Pressing (ECAP)
  27. Friction Stir Processing (FSP)
  28. Accumulative Roll Bonding (ARB)
  29. Multi Axial Forging (MAF)
  30. Severe Plastic Deformation : Case Study
  31. Overview on Thermo-Chemical treatments
  32. Overview on Thermo-Chemical treatments (Contd.)
  33. Thermodynamic aspects of thermo-chemical treatments: Preliminaries
  34. Thermodynamics of Gaseous Nitriding - I
  35. Thermodynamics of Gaseous Nitriding - II
  36. Gaseous Nitriding of Pure Iron
  37. Gaseous Nitriding of Iron based alloys
  38. Duplex and Dual Phase microstructures through nitriding
  39. Alloying element nitride precipitation during nitriding of iron based alloys
  40. Kinetics of gaseous nitriding

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Roorkee.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights