IIT Guwahati · Biology & Medicine

Transport Phenomena in Bioprocess Engineering

Prof. Selvaraju Narayanasamy · 60 free video lectures

This course involves the study of momentum, heat, and mass transfer essential to understand and optimize biotechnological systems. This course introduces the fundamental principles, covering definitions, units, and dimensionless numbers critical to analyzing transport processes. It explores fluid…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. Lecture 01: Course Introduction: Transport Phenomena
  2. Lecture 02: Fundamentals of Transport Phenomena - Part I
  3. Lecture 03: Fundamentals of Transport Phenomena - Part II
  4. Lecture 04: Dimensional Analysis and Dimensionless Numbers in Bioprocess Engineering - Part I
  5. Lecture 05: Dimensional Analysis and Dimensionless Numbers in Bioprocess Engineering - Part II
  6. Lecture 01: Aspect of Rheology in Bioprocess Engineering​ - Part I
  7. Lecture 02: Aspect of Rheology in Bioprocess Engineering​ - Part II
  8. Lecture 03: Non-Newtonian Fluids in Bioprocess Engineering
  9. Lecture 04: Rheology of Fermentation Broth: Behavior and its implications
  10. Lecture 05: Viscoelastic Fluids and Rheological Measurement Techniques
  11. Lecture 01: Introduction to Boundary Layer
  12. Lecture 02: Fluid flow Dynamics in Flat Plate
  13. Lecture 03: Fluid flow Dynamics in Circular Tube
  14. Lecture 04: Fluid flow Dynamics in Circular Tube (Contd.,)
  15. Lecture 05: Bernoulli's Equation
  16. Lecture 1: Pumps in Bioprocess Engineering
  17. Lecture 2: NPSH and Cavitation: Concepts and Prevention Strategies
  18. Lecture 3: Fluid Flow Measurement
  19. Lecture 4: Fluid Flow Measurement (Contd.,)
  20. Lecture 5: Pressure Measurement
  21. Lecture 01: Fundamentals of Flow Through Porous Media
  22. Lecture 02: Fundamentals of Darcy's Law and Packed-Bed Reactor Hydrodynamics
  23. Lecture 03: Hydrodynamics of Laminar Flow in Packed Beds and the Kozeny–Carman Equation
  24. Lecture 04: Turbulent Flow in Packed Beds and the Ergun Equation
  25. Lecture 05: Particle Shape Effects and Effective Particle Diameter in PBR
  26. Lecture 01: Case Study: Design of an Enzyme Immobilized Packed-Bed Bioreactor for Continuous Operation
  27. Lecture 02: Fundamentals of Fluidized Bed Reactors
  28. Lecture 03: Minimum Fluidization Velocity and Bed Expansion in Fluidized-Bed Reactors
  29. Lecture 04: Minimum Bubbling Velocity in Fluidized-Bed Reactors
  30. Lecture 05: Case Study: Designing a Fluidized-Bed Bioreactor for Wastewater Treatment
  31. Lecture 1: Fundamentals of Heat Transfer and Steady-State Conduction in Bioprocess Engineering​
  32. Lecture 2: Convection and Radiation Heat Transfer​
  33. Lecture 3: Heat Transfer Between Two Fluids​
  34. Lecture 4: Principle of Heat Transfer: Condensation and Evaporation
  35. Lecture 5: Heat Transfer in Different Geometries
  36. Lecture 01: Heat Exchangers in Bioprocess Engineering: Principles, Configurations, LMTD
  37. Lecture 02: Heat Exchanger Analysis : ε–NTU Method & Concept of Fouling
  38. Lecture 03: Introduction to Unsteady-State Heat Transfer & its application
  39. Lecture 04: Applications of Heat Transfer : Freezing and Agitated-Vessel Heat Transfer
  40. Lecture 05: Heat Transfer and Thermal Sterilisation in Bioprocess Engineering: Coils, Batch and Continuous Sterilisation Systems
  41. Lecture 01: Fundamentals of Mass Transfer and Molecular Diffusion in Bioprocess Engineering
  42. Lecture 02: Interphase Mass Transfer and Convective Transport in Bioprocess Engineering
  43. Lecture 03: Convective and Liquid–Solid Mass Transfer in Bioprocess Engineering
  44. Lecture 04: Liquid–Liquid Mass Transfer in Bioprocess Engineering
  45. Lecture 05: Gas–Liquid Mass Transfer and Oxygen Transfer in Shake Flask System
  46. Lecture 01: Mass Transfer Coefficients: Fundamentals, Significance and Experimental Determination
  47. Lecture 02: Measurement of Mass Transfer Coefficients (Contd.) and Scale-Up Considerations
  48. Lecture 03: Case Study: Gas-liquid and liquid-liquid mass transfer in a stirred-tank bioreactor
  49. Lecture 04: Case study: Gas-liquid and liquid-liquid mass transfer in stirred-tank bioreactor contd.,
  50. Lecture 05: Analysis of diffusion through porous solids, crystalline solids and polymers
  51. Lecture 01: Fundamentals and Operations of Adsorption in Bioprocess Engineering
  52. Lecture 02: Adsorption Isotherms and Fixed-Bed Adsorption: Equilibrium, Mass Transfer and Column Design
  53. Lecture 03: Introduction to Distillation and Vapor–Liquid Equilibrium
  54. Lecture 04: Binary Distillation with Reflux — McCabe–Thiele Method and Tray Efficiency
  55. Lecture 05: Distillation of Multicomponent Mixtures: Equilibrium, Shortcut Design and Column Analysis
  56. Lecture 01: Fundamentals of Drying in Bioprocess Technology
  57. Lecture 02: Drying Kinetics, Transport Mechanism, and Freeze-Drying Fundamentals
  58. Lecture 03: Case Study: Application of Heat and Mass Transfer in Freeze-Drying
  59. Lecture 04: Case Study: Application of Heat and Mass Transfer in Freeze-Drying contd.,
  60. Lecture 05: Downstream Processing in Bioprocess Engineering

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Guwahati.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights