IIT Bombay · Engineering

Turbomachinery Aerodynamics

Prof. A M Pradeep , Prof. Bhaskar Roy · 40 free video lectures

40 video lectures. Topics: Introduction to Turbo machines Syllabus, References and Schedules; Axial Flow Compressors and Fans : Introduction to Compressor Aerothermodynamics; A two dimensional analytical model :Cascade; 2D losses in Axial flow Compressor Stage : Primary losses; Tutorial 1 : Two…

▶ Play on Open Lecture HallCourse page ↗

Lectures

  1. L1-Introduction to Turbo machines Syllabus, References and Schedules
  2. L2-Axial Flow Compressors and Fans : Introduction to Compressor Aerothermodynamics
  3. L3-A two dimensional analytical model :Cascade
  4. L4-2D losses in Axial flow Compressor Stage : Primary losses
  5. L5-Tutorial 1 : Two Dimensional Axial Flow Compressors
  6. L6-3D Flows in Blade Passages, Secondary Flows, Tip leakage Flow, Scrubbling
  7. L7-Three Dimensional Flow Analysis : Radial Equilibrium Concept
  8. L8-Classical Blade Design Laws : Free Vortex and other Laws
  9. L9-Three Dimensional Flow Analysis in Axial Flow Compressor
  10. L10-Tutorial 2: Three Dimensional Axial Flow Compressors
  11. L11-Axial Compressor Characteristics: Single stage, Multi stage and Multi spool Characteristics
  12. L12-Instability in Axial Compressors
  13. L13-Inlet Distortion and Rotating Stall, Control of Instability
  14. L14-Transonic Compressors and Shock Structure Models, Transonic Compressor Characteristics
  15. L15-Axial Flow Compressor Design, Inter Spool Duct
  16. L16-Design of Compressor Blades, Aerofoil Design (Subsonic, Transonic, Supersonic Profiles )
  17. L17-Design of Compressor Blade: 3D Blade Shapes of Rotors and Stators
  18. L18-Noise Problem in Axial Compressors and Fans
  19. L19-Axial Flow Turbines: Introduction to Turbines Aerothermodynamics
  20. L20-Axial Flow Turbines: Turbine Blade 2D (Cascade) Analysis
  21. L21-Axial Flow Turbines: Work done, Degree of Reaction, Losses and Efficiency
  22. L22-Axial Flow Turbines: Blade and Axial Flow Passages, Exit Flow Matching with Nozzle
  23. L23-Tutorial 3 : Axial Flow Turbines
  24. L24-Multi staging and Multi spooling of Turbine
  25. L25-3D Flow in Turbine: 3D Flow Theories, Free Vortex Theories etc.
  26. L26-Tutorial 4 : 3D Flows in Axial Flow Turbines
  27. L27-Turbine Blade Cooling - Fundamentals of Heat Transfer, Blade Cooling Requirements
  28. L28-Turbine Blade Cooling Technologies
  29. L29-Turbine Blade Design: Turbine Profiles, Aerofoil Data and Profile Construction
  30. L30-Turbine Blade Design: 3D Blade Shapes
  31. L31-Centrifugal Compressors: Thermodynamics and Aerodynamics
  32. L32-Centrifugal Compressors : Characteristics, Stall, Surge Problems
  33. L33-Tutorial 5 : Centrifugal Compressors
  34. L34-Design of Centrifugal Compressors: Impellers, Vane/Vane less Diffusers, Volutes
  35. L35-Radial Turbines: Thermodynamics and Aerodynamics
  36. L36-Tutorial 6 : Radial Turbines
  37. L37-Radial Turbine Characteristics and Design of Radial Turbines
  38. L38-CFD for Turbomachinery: Grid Generation, Boundary Conditions for Flow Analysis
  39. L39-CFD for Turbomachinery: Flow Track and Inter-spool Duct Design using CFD
  40. L40-CFD for Turbomachinery: 2D and 3D Blade Generation and Analysis Using CFD

From NPTEL (IITs and IISc) · CC BY-NC-SA. More from IIT Bombay.

Open Lecture Hall is free, with no ads and no sign-up. It is not run by or connected to any university; the lectures are the universities' own free recordings, played from where they host them. About & rights